2026-05-18 <<
1. Try to use sealant, and if necessary, paint can be used as a substitute to achieve the desired sealing effect;
II. Before assembling rubber seals, carefully inspect their appearance quality; use specialized tools for press-fitting to avoid deformation caused by knocking;
III. Add lubricating grease as required, and regularly clean and unclog the vent hole, check valve, etc;
4. Assembly is conducted under extremely clean conditions, ensuring that the working surfaces of the parts are free from bumps, scratches, burrs, and other attachments;
5. Strictly follow operating procedures, and ensure that sealing components are installed correctly to prevent deformation due to improper seating;
VI. Master the performance specifications and usage requirements of seals, and replace failed parts in a timely manner;
7. For thin-walled components such as side covers, sheet metal cold forming correction is employed; for axle hole components prone to wear, processes such as metal spraying, welding repair, gluing, and machining can be adopted to achieve the original factory dimensions;
8. If the nut is stripped, broken, or loose, it should be repaired or replaced with a new one, and tightened to the specified torque.
